Downloads

Our air data module runs on custom firmware which can be found here, including the latest firmware binaries:

Not found

To update to the latest firmware, there are two methods you can use:

• Mission Planner

• DroneCAN GUI

Mission Planner

1. Connect to your Flight Controller in Mission Planner

2. Go to Setup > Optional Hardware > UAVCAN

3. Click CAN1 or CAN2 (Depending on the bus you are connected to)

4. Click on Menu next to the Air Data Module

5. Click Update Firmware

6. Select the .bin file from the latest release page above

DroneCAN GUI

1. Connect to your Flight Controller in DroneCAN GUI

2. Double Click on the Air Data Module

3. Click Update Firmware

4. Select the .bin file from the latest release page above

You are now on the latest version of the firmware!

Case

You can 3D print the cases using the attached files:

473KB

Airspeed Base.stl

466KB

Airspeed Lid.stl