Beyond Robotix
  • Welcome!
  • Kahuna
    • Quick Start Guide
    • Further Configuration
    • INAV Setup
    • Hardware
    • Firmware Update
    • Troubleshooting
  • CAN Node System
    • Node Development Board
    • Micro Node
    • Arduino DroneCAN
    • AP Periph
  • Air Data Module
  • Engineering Change Notice
Powered by GitBook
On this page
  1. Kahuna

Firmware Update

Staying up to date with the latest firmware for your Kahuna

PreviousHardwareNextTroubleshooting

Last updated 3 months ago

All the latest firmware is found at

Firmware Update Instructions

  1. Download the Latest Firmware: Use the link provided above to download the .bin file.

  2. Power On Your Kahuna: Ensure the device is turned on.

  3. Connect to Kahuna via Wi-Fi.

  4. Access the Web UI: Default IP: 192.168.4.1

  5. Navigate to the Firmware Update Tab.

  6. Upload the Firmware: Select and upload the .bin file.

Release v2.2.1 · BeyondRobotix/KahunaGitHub
Logo